2016
Publikationen in Refereed Journals
Radl, Sl., Roppolo, I., Pölzl, K., Ast, M., Spreitz, J., Griesser, T., Kern, W., Schlögl, S., Sangermano, M. (12/2016, online availability since 12/2016). "Light triggered formation of photo-responsive epoxy based networks", Polymer 2017, Vol. 109, pp 349 - 357
Bomze, D., Knaack, P., Koch, T., Jin, H., Liska, R. (12/2016). "Radical induced cationic frontal polymerization as a versatile tool for epoxy curing and composite production", Journal of Polymer Science, Part A: Polymer Chemistry 2016, 54(23), pp 3751 - 3759
Manhart, J., Ayalur-Karunakaran, S., Radl, S., Oesterreicher, A., Moser, A., Ganser, C., Teichert, C., PInter, G., Kern, W., Griesser, T., Schlögl, S. (10/2016). "Data on synthesis and thermo-mechanical properties of stimuli-responsive rubber materials bearing pendant anthracene groups.", Data in Brief 2016, Vol. 9, pp 524 - 529
Manhart, J., Ayalur-Karunakaran, S., Radl, S., Oesterreicher, A., Moser, A., Ganser, C., Teichert, C., Pinter, G., Kern, W., Griesser, T., Schlögl, S. (10/2016). "Design and application of photo-reversible elastomer networks by using the [4πs+ 4πs] cycloaddition reaction of pendant anthracene groups.", Polymer 2016, Vol. 102, pp 10 - 20
Manhart, J., Hausberger, A., Mühlbacher, I., Schaller, R., Holzner, A., Kern, W., Schlögl, S. (10/2016). "UV-induced modulation of tribological characteristics: Elastomeric materials featuring controlled anisotropic friction properties.", AIP Conference Proceedings 2016, Vol. 1779, Article 080004
Schlögl, S., Lenko, D., Bichler, S., Lemesch, G., Ramsauer, F., Ladstätter, W., Kern, W. (10/2016). "Flexible Epoxy Based Composites with Enhanced Delamination Resistance", AIP Proceedings 2016, Vol. 1779, Article 080007
Luef, K. P., Hoogenboom, R., Schubert, U. S., Wiesbrock, F. (09/2016). "Microwave-Assisted Cationic Ring-Opening Polymerization of 2-Oxazolines", Advances in Polymer Science 2016, Vol. 274, pp 183 - 208
Fimberger, M., Wiesbrock, F. (09/2016). "Microwave-Assisted Synthesis of Polyesters and Polyamides by Ring-Opening Polymerization", Advances in Polymer Science 2016, Vol. 274, pp 149 - 182
Kochetov, R., Tsekmes, I. A., Morshuis, P. H. F., Smit, J. J., Wanner, A. J., Wiesbrock, F., Kern, W. (08/2016). "Effect of water absorption on dielectric spectrum of nanocomposites", IEEE, EIC 2016, pp 579 - 582
Wiesbrock, F. (08/2016). "Interdisciplinary Approaches towards Materials with Enhanced Properties for Electrical Engineering", Polymers 2016, Vol. 8, Article 307
Moser, A., Feuchter, M. (07/2016). "Mechanical Properties of Composites Used in High-Voltage Applications", Polymers 2016, Vol. 8, Article 260
Andraschek, N., Wanner, A. J., Ebner, C., Riess, G. (05/2016). "Mica/Epoxy-Composites in the Electrical Industry: Applications, Composites for Insulation, and Investigations on Failure Mechanisms for Prospective Optimizations", Polymers 2016, Vol. 8, Article 201
Plesa, I., Notingher, P.V., Schlögl, S., Sumereder, C., Muhr, M. (04/2016). "Properties of Polymer Composites Used in High-Voltage Applications", Polymers 2016, Vol. 8, Article 173
Wiesbrock, F., Griesser, T. (02/2016). "Leitfähige Polymere", Plus Lucis 2016, pp 49 - 51
Ligon, S., Schwentenwein, M., Gorsche, C., Stampfl, J., Liska, R. (01/2016). "Toughening of photo-curable polymer networks: a review", Polymer Chemistry 2016, 7, pp 257 - 286
Fimberger, M., Tsekmes, I.-A., Kochetov, R., Smit, J., Wiesbrock, F. (01/2016). "Crosslinked Poly(2-oxazoline)s as "Green" Materials for Electronic Applications", Polymers 2016, 8, pp 6:1 - 6:12
Konferenzbeiträge
Wanner, A. J., Brasch, M., Moser, A., Feuchter, M., Kern, W. (11/2016). "Effects of moisture on the properties of uncured and cured epoxy-anhydride based thermosets", Asian Workshop on Polymer Processing 2016, Bood of Abstracts, p 151, PP028
Wanner, A. J., Moser, A., Marx, P., Ebner, C., Wewerka, K., Pinter, G., Kern, W. (11/2016). "Epoxy-anhydride based thermosets reinforced by inorganic nanoparticles: Effects on shelf-lifetime and thermo-mechanical properties", Asian Workshop on Polymer Processing 2016, Book of Abstracts, p 66, OC005
Bandl, C. Schlögl, S, Feldbacher, S., Kern, W. (09/2016). "Investigation of temporary binding pressure sensitive adhesives comprising external triggered release", EURADH 2016: Adhesion ´16, Book of Abstracts, pp 360 - 363
Wiesbrock, F. (08/2016). "Green Insulators for High Voltages", American Chemical Society, 252nd ACS National Meeting & Exposition, Philadelphia
Wiesbrock, F., Fimberger, M., Tsekmes, I-A., Kochetov, R., Smit, J. J. (08/2016). "Crosslinked poly(2-oxazoline)s derived from renewable resources: Green alternatives for polyamides as insulators in electronic applications", Abstracts of papers/American Chemical Society. 252nd ACS National Meeting & Exposition, August 21 - 25, 2016, p. POLY-189
Plesa, I., Anaca, O., Wiesbrock, F., Muhr, M., Schichler, U., Sumereder, C. (06/2016). "Test setup and methods for the electrical characterization of semiconducting powders", ISH COLLECTION, 2016, Article 467, 4 pages
Zhang, Z., Moser, A., Feuchter, M., Stelzer, F., Wiesbrock, F. (03/2016). "Curing behavior & surface characterization of BADGE-based epoxy resins", Abstracts of papers/American Chemical Society 2016, POLY, 1 p.
Zhang, Z., Kelly, A., Mühlbacher, I., Stelzer, F., Wiesbrock, F. (03/2016). "Zeta potential measurements for the characterization of polymer surfaces with varying amide/amine contents", Abstracts of papers/American Chemical Society 2016, POLY, 1 p.
Buchbeiträge
Andraschek, N., Wanner, A. J., Ebner, C., Riess, G. (12/2016). "Mica/Epoxy-Composites in the Electrical Industry: Applications, Composites for Insulation, and Investigations on Failure Mechanisms for Prospective Optimizations", Nanao- and Microcomposites for Electrical Engineering Applications, MDPI, ISBN: 978-3-03842-292-1, pp 107 - 137
Moser, A., Feuchter, M. (12/2016). "Mechanical Properties of Composites Used in High-Voltage Applications", Nano- and Microcomposites for Electrical Engineering Applications, MDPI, ISBN: 978-3-03842-292-1, pp 92 - 106
Wiesbrock, F. (12/2016). "Interdisciplinary Approaches towards Materials with Enhanced Properties for Electrical Engineering", Nano- and Microcomposites for Electrical Engineering Applications, MDPI, ISBN: 978-3-03842-292-1, pp XIII - XV
Plesa, I., Notingher, P. V., Schlögl, S., Sumereder, C., Muhr, M. (12/2016). "Properties of Polymer Composites Used in High-Voltage Applications", Nano- and Microcomposites for Electrical Engineering Applications, MDPI, ISBN: 978-03842-292-1, pp 1 - 91
Wiesbrock, F. (09/2016). "Polymerbasierte Kontaktbiozide als Additive zur Oberflächenfunktionalisierung", 3. Mitteldeutsches Forum: 3D-Druck in der Anwendung. Merseburg: Hochschule Merseburg, ISBN: 978-3-942703-51-2, pp 235 - 266
Zhang, Z., Müller, C., Moser, A., Feuchter, M., Mühlbacher, I., Stelzer, F., Muhr, H., Schichler, U., Schwarz, R., Pukel, G., Wiesbrock, F. (04/2016). "Epoxidharze als Adhäsive im Transformatorenbau", 25. Leobener Kunststoffkolloquium: Kunststoffgerechte Bauteilentwicklung - vom Werkstoff zum Produkt, ISBN: 978-9503248-5-3, pp 207 - 208
Andraschek, N., Ebner, C. M., Gölles, M., Rieß, G., Kern, W. (04/2016). "Einfluss verschiedenster Modifizierungen auf das Sedimentationsverhalten von Bornitrid für die Verwendung in Beschichtungssystemen", 25. Leobener Kunststoffkolloquium: Kunststoffgerechte Bauteilentwicklung - vom Werkstoff zum Produkt, ISBN: 978-3-9503248-5-3, pp 177 - 178
Fimberger, M., Wiesbrock, F., (04/2016). "MW-Assisted Polymer Syntheses and Modifications towards MW-Assisted Material Fabrication", Microwave Engineering of Nanomaterials. Pan Stanford Publishing, Singapore, ISBN: 978-9-81466-942-9, pp 73 - 114
Fimberger, M., Tsekmes, I.-A., Kochetov, R., Smit, J. J., Wiesbrock, F. (01/2016). "Crosslinked Poly(2-oxazoline)s as "Green" Materials for Electronic Applications", Nano- an Microcomposites for Electrical Engineering Applications, MDPI, ISBN: 978-3-03842-292-1, pp 221 - 236
Fimberger, M., Wiesbrock, F. (2016), "Microwave-Assisted Synthesis and Modification of Polymers", Erwann Guenin (ed.): Microwave Engineering of Nanomaterials: From Meso to Nanoscale. Chapter 3: M. Fimberger, F. Wiesbrock (authors), pp 75 - 115
Poster
Wanner, A. J., Brasch, M., Moser, A., Feuchter, M., Kern, W. (11/2016). "Effects of moisture on the properties of uncured and cured epoxy-anhydide based thermosets", Asian Workshop on Polymer Processing 2016, Melbourne, AUS
Bandl, C., Schlögl, S., Feldbacher, S., Kern, W. (09/2016). "Investigation of temporary binding pressure sensitive adhesives comprising external triggered release", EURADH 2016: Adhesion ´16, Glasgow, UK
Radl, S. V., Griesser, T., Edler, M., Kern, W., Rath, T., Trimmel, G., Pavitschitz, A., Teichert, C., Simbrunner, C., Schwabegger, G., Sitter, H. (09/2016). "A Novel UV Tunable and Patternable Polyaniline Derivative as a Charge Injection Layer in OLEDs", 4th European Symposium of Photopolymer Science (ESPS) 2016
Müller, C., Zhang, Z., Moser, A., Feuchter, M., Mühlbacher I., Stelzer, F., Schwarz, R., Pukel, G., Wiesbrock, F., Muhr, H. M., Schichler, U. (05/2016). "Epoxidkleber im Leistungstransformator", Siemens CKI Conference, Graz, A
Zhang, Z., Müller, C., Moser, A., Feuchter, M., Mühlbacher, I., Stelzer, F., Muhr, H. M., Schichler, U., Schwarz, R., Pukel, G., Wiesbrock, F. (04/2016). "Epoxidharze als Adhäsive im Transformatorenbau", 25. Leobener Kunststoffkolloquium, Leoben, A
Andraschek, N., Ebner, C., Gölles, M., Riess, G., Kern, W. (04/2016). "Einfluss verschiedenster Modifizierungen auf das Sedimentationsverhalten von Bornitrid für die Verwendung in Beschichtungssystemen", 25. Leobener Kunststoffkolloquium: Kunststoffgerechte Bauteilentwicklung - vom Werkstoff zum Produkt, Leoben, A
Wiesbrock, F., Fimberger, M., Tsekmes, I-A., Kochetov, R., Smit, J. J. (03/2016)."Zeta potential measurements for the characterization of polymer surfaces with varying amide/amine contents", ACS Spring Meeting San Diego 2016, USA
Vorträge
Wanner, A. J., Moser, A., Marx, P., Ebner, C., Wewerka, K., Pinter, G., Kern, W. (11/2016). "Epoxy-anhydride based thermosets reinforced by inorganic nanoparticles: Effects on shelf-lifetime and thermo-mechanical properties", Asian Workshop on Polymer Processing 2016, Melbourne, AUS
Knaack, P., Bomze, D., Krossing, I., Liska, R. (09/2016). "Advances in Cationic Photopolymerization", Advanced techniques for Photocuring of Hydrogels 2016, Leizpig, D
Liska, R. (09/2016). "Advanced techniques for Photocuring of Hydrogels", Advanced techniques for Photocuring of Hydrogels 2016, Leipzig, D
Wiesbrock, F., Fimberger, M., Tsekmes, I-A., Kochetov, R., Smit, J. J. (08/2016). "Crosslinked Poly(2-oxazoline)s derived from renewable resources: "Green" Alternatives for Polyamides as Insulators in Electronic Applications", 252nd American Chemical Society National Meeting & Exposition: Fall Meeting, Philadelphia, USA
Zhang, Z., Moser, A., Feuchter, M., Stelzer, F., Wiesbrock, F. (04/2016). "Curing Behavior and Surface Characterization of BADGE-Based Epoxy Resins", DocDays Chemistry 2016, Graz, A
Zhang, Z., Moser, A., Feuchter, M., Stelzer, F., Wiesbrock, F. (03/2016). "Curing behavior & surface characterization of BADGE-based epoxy resins", ACS Spring Meeting San Diego 2016, USA
Riess, G. (01/2016). "Components for high voltage insulation with high thermal conductivity", PolyComp Annual Meeting 2016, Leoben, A
Radl, S., Schlögl, S., Bergmann, I., Tuna, A., Ramsauer, F., Zerobin, F., Brasch, M., Pertl, P. Schichler, U. (01/2016). "Stress gradings based on semiconducting composites of silicon carbide particles and epoxy resins", PolyComp Annual Meeting 2016, Leoben, A
Wanner, A. J., Moser, A., Kern, W. (01/2016). "Advanced resins for electrical engineering applications", PolyComp Annual Meeting 2016, Leoben, A
Müller, C., Muhr, M., Schichler, U., Zhang, Z. Wiesbrock, F., Pukel, G., Schwarz, R. (01/2016). "Dielectrical Behavior of Bonded Transformer Boards", PolyComp Annual Meeting 2016, Leoben, A
Zhang, Z., Moser, A., Feuchter, M., Müller, C., Schwarz, R., Pukel, G., Stelzer, F., Wiesbrock, F. (01/2016). "Casein-based adhesive for the bonding of transformer boards", PolyComp Annual Meeting 2016, Leoben, A
Plesa, I., Schlögl, S., Radl, S. V., Wiesbrock, F., Schichler, U. (01/2016). "Preparation and characterization of flexible semiconducting polymer based composites", PolyComp Annual Meeting 2016, Leoben, A
Nothdurft, P., Feldbacher, S., Krivec, T., Steinberger, A., Gil-Ibanez, B., Kern, W. (01/2016). "Interfacial adhesion in printed circuit boards", PolyComp Annual Meeting 2016, Leoben, A
Bandl, C., Feldbacher, S., Schlögl, S., Weidinger, G., Kern, W. (01/2016). "Release Coatings for PCB production", PolyComp Annual Meeting 2016, Leoben, A
Moser, A., Feuchter, M., Pinter, G. (01/2016). "Microstructure Optimization and Structure-property Relationships of Thermoset Nanocomposites", PolyComp Annual Meeting 2016, Leoben, A
Huifei, J. (01/2016), "Dielectric spectroscopy", PolyComp Annual Meeting 2016, Leoben, A
Bomze, D., Knaack, P., Liska, R. (01/2016). "Advances in Radical induced Cationic Frontal Polymerization", PolyComp Annual Meeting 2016, Leoben, A
Esmaeil Moghadam, D. (01/2016). "Interturn Insulation Quality Assessment, Considerung the Standards State", PolyComp Annual Meeting 2016, Leoben, A
2015
Publikationen in Refereed Journals
Lenko, D., Schlögl, S., Bichler, S., Lemesch, G., Ramsauer, F., Ladstätter, W., Kern, W. (12/2015). "Flexible epoxy-silicone rubber laminates for high voltage insulations with enhanced delamination resistance", Polymer Composites 2015, 12, 2238 - 2247
Bomze, D., Knaack, P., Liska, R. (12/2015). "Successful radical induced cationic frontal polymerization of epoxy-based monomers by C-C labile compounds", Polymer Chemistry 2015, 6, pp 8161 - 8167
Radl, S., Kreimer, M., Oesterreicher, A., Griesser, T., Moser, A., Kern, W., Schlögl, S. (12/2015). "New strategies towards reversible and mendable epoxy based materials employing [4ps + 4ps] photocycloaddition and thermal cyclorevrsion of pendant anthracene groups", Polymer 2015, 80, pp 76 - 87
Radl, S., Kreimer, M., Manhart, J., Griesser, T., Moser, A., Pinter, G., Kalinka, G., Kern, W., Schlögl, S. (07/2015). "Photocleavable epoxy based materials", Polymer 2015, 69, pp 159 - 168
Plesa, I., Schlögl, S., Radl, S. V., Mühlbacher, I., Schichler, U. (05/2015). "The Influence of Surface Modification on the Electrical Properties of Silicon Carbide Flakes", IEEE Advanced Topis in Electrical Engineering ATEE 2015, pp 460 - 463
Fimberger, M., Wiesbrock, F. (2015). "Microwave-assisted synthesis of polyesters and polyamides by ring-opening polymerizations", Advances in Polymer Science, in press.
Ebner, C., Hoogenboom, R., Schubert, U.S., Wiesbrock, F. (2015). "Microwave-assisted cationic ring-opening polymerization of 2-oxazolines", Advances in Polymer Science, in press.
Konferenzbeiträge
Schlögl, S., Lenko, D., Bichler, S., Lemesch, G., Ramsauer, F., Ladstätter, W., Kern, W. (09/2015). "Flexible Epoxy Based Composites with Enhanced Delamination Resistance", Polymer Processing Society Regional Conference 2015, Book of Abstracts, p 200
Plesa, I., Schlögl, S., Radl, S. V., Wiesbrock, F., Schichler, U. (09/2015). "Preparation and Characterization of Flexible Semiconducting Nanocomposites", Polymer Processing Society Regional Conference 2015, Book of Abstracts, p 24
Nothdurft, P., Feldbacher, S., Kern, W. (09/2015). "Interfacial strengthening of copper/epoxy laminates with an amino-functional polymer", Polymer Processing Society Regional Conference 2015, Book of Abstracts, p 187
Wanner, A. J., Moser, A., Brasch, M. Porubsky, T., Feuchter, M., Pinter, G., Kern, W. (09/2015). "Epoxy-anhydride based thermosets reinforced by surface modified inorganic nanoparticles: Effects on cure kinetics, thermal and thermo-mechanical properties", Polymer Processing Society Regional Conference 2015, Book of Abstracts, p 29
Manhart, J., Hausberger, A., Mühlbacher, I., Schaller, R., Holzner, A., Kern, W., Schlögl, S. (09/2015). "UV-Induced Modulation of Tribological Characteristics: Elastomeric Materials Featuring Controlled Anisotropic Friction Properties", Polymer Processing Society Regional Conference 2015, Book of Abstracts, p 195
Plesa, I., Anaca, O., Wiesbrock, F., Muhr, M., Schichler, U., Sumereder, C. (08/2015). "Test setup and method for the electrical characterization of semiconducting powders", 19th Int. Symposium on High Voltage Engineering - ISH, Book of Abstracts #467, 4 p.
Kochetov, R., Tsekmes, I. A., Morshuis, P. H. F., Smit J. J., Wanner, A. J., Wiesbrock, F., Kern, W. (07/2015). "Effect of water absorption on dielectric spectrum of nanocomposites", IEEE 11th International Conference on the Properties and Applications of Dielectric Materials (ICPADM), Book of Abstracts
Moser, A., Feuchter, M., Wanner, A., Kern, W., Pinter, G. (06/2015). "Curing kinetics investigations on nanoparticle reinforced epoxy-anhydride systems", European Polymer Congress epf 2015, Book of Abstracts, p 163
Nothdurft, P., Feldbacher, S., Kern, W. (06/2015). "Strengthening of the copper/epoxy resin interface with an amino-functional polymer", European Polymer Congress epf 2015, Book of Abstracts, p 150
Feuchter, M., Moser, A., Wanner, A. J., Kern, W., Pinter, G. (06/2015). "The influence of nanoscale particles on the mechanical, thermal and thermo-mechanical properties of anhydride based epoxy systems", European Polymer Congress epf 2015, Book of Abstracts, p. 163
Zhang, Z., Moser, A., Mühlbacher, I., Stelzer, F., Pukel, G., Schwarz, R., Wiesbrock, F. (05/2015) "Model study of badge-based epoxy resin adhesives", Danube Vltava Sava Polymer Meeting 2015, DVSPM 2015, Book of Abstracts, p. 60
Nothdurft, P., Feldbacher, S., Kern, W. (05/2015). "Amino functional polymer as interconnecting layer of copper/epoxy laminates", Danube Vltava Sava Polymer Meeting 2015, DVSPM 2015, Book of Abstracts, p 39
Bomze, D., Kern, W., Liska, R. (05/2015). "Cationic frontal polymerization for the production of electrical insulating materials", Danube Vltava Sava Polymer Meeting 2015, DVSPM 2015, Book of Abstracts, p. 62
Wanner, A. J., Moser, A., Tsekmes, I. A., Kochetov, R., Smit, J. J., Kern, W. (03/2015). "Thermo-mechanical and dielectric properties of epoxy nanocomposites containing surface functionalized boron nitride and aluminum oxide naoparticles", 4th International Conference on Mulitfunctional, Hybrid and Nanomaterials, Book of Abstracts
Plesa, I., Notingher, P. V., Zaharescu, T., Kern, W. (03/2015). "Structural model of polymer nanocomposites based on loow-density polyethylene and inorganic nanofillers", 4th Internatinal Conference on Multifunctional, Hybrid and Nanomaterials, Book of Abstracts
Fachzeitschriften
Schlögl, S., Lenko, D. (04/2015). "High-voltage insulation with enhanced delamination resistance", Rubber Fibres Plastics
Schlögl, S., Lenko, D. (02/2015). "Hochspannungsisolation mit verbesserter Delaminationsbeständigkeit", Gummi Fasern Kunststoffe
Schlögl, S., Lenko, D., Bichler, S., Lemesch, G., Ramsauer, F., Ladstätter, W., Kern, W. (2015). "Flexible Epoxy Based Composites with Enhanced Delamination Resistance", Rubber Fibres Plastics
Poster
Andraschek, N., Ebner, C., Gölles, M., Riess, G., Kern, W. (12/2015). "Influence of different modification ways on the sedimentation behavior of boron nitride applied in coating systems". Pacifichem Conference 2015
Knaack, P., Bomze, D., Krossing, I., Liska, R. (09/2015). "Novel initiator for photoinduced cationic polymerization", Photopolymerization Fundamentals 2015
Plesa, I., Anaca, O., Wiesbrock, F., Muhr, M., Schichler, U., Sumereder, C. (08/2015). "Test setup and method for the electrical characterization of semiconducting powders", 19th International Symposium on High Voltage Engineering - ISH 2015
Bomze, D., Knaack, P., Liska, R. (09/2015). "Radical induced Cationic Frontal Polymerization", Photopolymerization Fundamentals 2015
Moser, A., Feuchter, M., Wanner, A., Kern, W., Pinter, G. (06/2015). "Curing kinetics investigations on nanoparticle reinforced epoxy-anhydride systems", European Polymer Congress epf 2015
Feuchter, M., Moser, A., Wanner, A. J., Kern, W., Pinter, G. (06/2015). "The influence of nanoscale particles on the mechanical, thermal and thermo-mechnanical properties of anhydride based epoxy systems", European Polymer Congress epf 2015
Nothdurft, P., Feldbacher, S., Kern, W. (06/2015). "Strengthening of the copper/epoxy resin interface with an amino-functional polymer", European Polymer Congress epf 2015
Zhang, Z., Mühlbacher, I., Moser, A., Feuchter, M., PUkel, G., Schwarz, R., Stelzer, F., Wiesbrock, F. (05/2015). "Combined Approach to the Study of BADGE-based Epoxy Curing", Doc Days Chemistry
Plesa, I., Notingher, P. V., Zaharescu, T., Kern, W. (03/2015). "Structural model of polymer nanocomposites based on low-density polyethylene and inorganic nanofillers", Fourth International Conference on Mulitfunctional, Hybrid and Nanomaterials (Hybrid Materials 2015)
Wanner, A. J., Moser, A., Tsekmes, I. A., Kochetov, R., Smit, J. J., Kern, W. (03/2015). "Thermo-mechanical and dielectric properties of epoxy nanocomposites containing surface functionalized boron nitride and aluminum oxide nanoparticles", 4th International Conference on Multifunctional, Hybrid and Nanomaterials
Vorträge
Nothdurft, P., Feldbacher, S., Kern, W. (12/2015). "Strengthening of the copper/epoxy resin interface with an amino-functional polymer", Pacifichem Conference 2015
Bomze, D., Knaack, P., Liska, R. (10/2015). "Radical induced Cationic Frontal Polymerization", RadTech Europe 2015
Knaack, P., Bomze, D., Liska, R. (10/2015). "New photoacid generator for cationic polymerisation", RadTech Europe 2015
Manhart, J., Hausberger, A., Mühlbacher, I., Schaller, R., Holzner, A., Kern, W., Schlögl, S. (09/2015) "UV-Induced Modulation of Tribological Characteristics: Elastomeric Materials Featuring Controlled Anisoptropic Friction Properties", Polymer Processing Society Regional Conference 2015
Wanner, A., J., Moser, A., Brasch, M., Porubsky, T., Feuchter, M., Pinter, G., Kern, W. (09/2015). "Epoxy-anhydride based thermosets reinforced by surface modified inorganic nanoparticles: Efffects on cure kinetics, thermal and thermo-mechanical properties", Polymer Processing Society Regional Conference 2015
Nothdurft, P., Feldbacher, S., Kern, W. (09/2015). "Interfacial strengthening of copper/epoxy laminates with an amino-functional polymer", Polymer Processing Society Regional Conference 2015
Plesa, I., Schlögl, S., Radl, S. V., Wiesbrock, F., Schichler, U. (09/2015), "Preparation and Characterization of Flexible Semiconducting Nanocomposites", Polymer Processing Society Regional Conference 2015
Zhang, Z., Moser, A., Mühlbacher, I., Stelzer, F., Pukel, G., Schwarz, R., Wiesbrock, F. (05/2015). "Model Study of Badge-Based Epoxy Resin Adhesives", Danube Vltava Sava Polymer Meeting 2015, DVSPM 2015
Nothdurft, P., Feldbacher, S., Kern, W. (05/2015). "Amino functional polymer as interconnecting layer of copper/epoxy laminates", Danube Vltava Sava Polymer Meeting 2015, DVSPM 2015
Plesa, I., Schlögl, S., Radl, S. V., Mühlbacher, I., Schichler, U. (05/2015). "The Influence of Surface Modification on the Electrical Properties of Silicon Carbide Flakes", Advanced Topics in Electrical Engineering ATEE 2015
Liska, R. (05/2015). "Efficient Tuning of (Meth)acrylate Polymer Network Architecture", P2M Summer School
Bomze, D., Kern, W., Liska, R. (05/2015). "Cationic Frontal Polymerization For The Production of Electrical Insulating Materials", Danube Vltava Sava Polymer Meeting 2015, DVSPM 2015
Liska, R. (02/2015), "3D Printing of a New Generation of Biocompatible and Biodegradable Photopolymers", Makromolekulares Kolloquium 2015
2014
Publikationen in Refereed Journals
Jölly, I., Schlögl, S., Wolfahrt, M., Pinter, G., Fleischmann, M., Kern, W. (12/2014). "Chemical functionalization of composite surfaces for improved structural bonded repairs", Composites Part B: Engineering 2014, 69, 296 - 303.
Konferenzbeiträge
Liska, R. (10/2014). "Advanced applications of photopolymerization: 3D printing of biomaterials", 24. Lecture Conference on Photochemistry, Book of Abstracts, p. 50
Radl, S. V., Griesser, T., Kreimer, M., Österreicher, A., Kern, W., Schlögl, S. (09/2014). "Smart composites materials bearing photoswitchable crosslinks", 3rd European Symposium of Photopolymer Science, Book of Abstracts, 1 pp.
Radl, S. V., Griesser, T., Kreimer, M., Österreicher, A., Kern, W., Schlögl, S. (07/2014). "New epoxy-based resins and functional inorganic fillers with tunable mechanical properties for the preparation of comoposite materials with enhanced", 22nd Annual International Conference on Composites/Nanoengineering (ICCE-22), Book of Abstracts, 2 pp.
Kreimer, M., Lenko, D., Schlögl, S., Bichler, S., Lemesch, G., Ramsauer, F., Ladstätter, W., Kern, W. (07/2014). "Evaluation of selected characterization techniques to determine failure mechanisms of epoxy-based composite materials", 22nd Annual International Conference on Composites/Nanoengineering (ICCE-22), Book of Abstracts, 2 pp.
Schlögl, S., Lenko, D., Bichler, S., Lemesch, G., Ramsauer, F., Ladstätter, W., Kern, W. (07/2014). "Epoxy-based composites with modified elastomeric damping layers: new approaches for the manufacture of high voltage insulations with improved delamination", 22nd Annual International Conference on Composites/Nanoengeineering (ICCE-22), Book of Abstracts, 2 pp.
Manhart, J., Hausberger, A., Mühlbacher, I., Schaller, R., Holzner, A., Kern, W., Schlögl, S. (07/2014). "Structured and functional elastomer-based composites with tailored friction properties", 22nd Annual International Conference on Composites/Nanoengineering (ICCE-22), Book of Abstracts, 2 pp.
Fachzeitschriften
Schlögl, S., Lenko, D. (11/2014). "High-voltage insulation with enhanced delamination resistance", Plastics Research Online
Buchbeiträge
Wanner, A. J., Moder, A., Reichmann, A., Wewerka, K., Feuchter, M., Pinter, G., Kern, W. (11/2014). "Silika-Nanopartikel in Glas-Glimmer Verbundwerkstoffen", 23. Leobener Kunststoffkolloquium: Hocheffiziente Verbundwerkstoffe, ISBN: 978-3-9503248-3-9, pp. 201 - 205
Zhang, Z., Moser, A., Feuchter, M., Wieser, B., Mühlbacher, I., Pinter, G., Scharz, R., Pukel, G., Wiesbrock, F. (11/2014). "BADGE/Aminhärter-Systeme für die Verklebung von Isolationskompositen", 23. Leobener Kunststoffkolloquium: Hocheffiziente Verbundwerkstoffe, ISBN: 978-3-9503248-3-9, pp. 207 - 212
Kern, W., Muhr, N., Rieß, G., Schauberger, J. (09/2014). "Silica Nanoparticles bearing a photoreactive shell", European Symposium on Photopolymer Sciences, ESPS 2014, Wien; ISBN 978-3-9502992-9-8, pp. IL-14
Kern, W., Muhr, N., Rieß, G., Schauberger, J. (03/2014). "Silica nanoparticles bearing a photoreactive shell", Symposium Polymerblends und Nanocomposites: Beiträge/ 15. Problemseminar Polymermischungen, Halle (Saale) 5. und 6. März 2014. Hrsg.: Hans-Joachim Radusch: ISBN 978-3-86829-660-0
Poster
Wanner, A. J., Moser, A., Reichmann, A., Wewerka, K., Feuchter, M., Pinter, G., Kern, W. (11/2014). "Silika-Nanopartikel in Glas-Glimmer Verbundwerkstoffen", 23. Leobener Kunststoffkolloquium: Hocheffiziente Verbundwerkstoffe
Zhang, Z., Moser, A., Feuchter, M., Wieser, B., Mühlbacher, I., Pinter, G., Schwarz, R., Pukel, G., Wiesbrock, F. (11/2014). "BADGE/Aminhärter-Systeme für die Verklebung von Isolationskompositen", 23. Leobener Kunststoffkolloquium: Hocheffiziente Verbundwerkstoffe
Nothdurft, P., Feldbacher S., Kern, W. (11/2014). "Modification of copper surfaces with alkylsilanes and alkylphosphonic derivates", 23. Leobener Kunststoffkolloquium: Hocheffiziente Verbundwerkstoffe
Vorträge
Andraschek, N., Rieß, G., Kern, W. (12/2014). "Influence of different modification ways on the sedimenation behavior of Boron Nitride applied in coating systems", PPS 2014: Europe-Africa PPS Conference
Radl, S. V., Anaca, O., Schlögl, S., Bergmann, I., Falk, E., Ladstätter, W., Schweiger, P., Pertl, P., Sumereder, C., Muhr, M. (11/2014). "Stress gradings based on semiconducting composites of silicon carbide particles and epoxy resins", PolyComp Meeting 2014, Leoben, A
Wanner, A. J., Moser, A., Kern, W. (11/2014). "Advanced resins for electrical engineering applications", PolyComp Meeting 2014, Leoben, A
Zhang, Z., Pukel, G., Schwarz, R., Stelzer, F., Wiesbrock, F. (11/2014). "Functional adhesives with high temperature and chemical resistance for ultrahigh voltage applications", PolyComp Meeting 2014, Leoben, A
Mühlbacher, I., Zhang, Z., Wiesbrock, F., Stelzer, F. (11/2014). "Why is the zeta potential relevant?", PolyComp Meeting 2014, Leoben, A
Moser, A., Feuchter, M., Pinter, G. (11/2014). "Curing kinetic studies with differential scanning calorimetry", PolyComp Meeting 2014, Leoben, A
Nothdurft, P., Feldbacher, S., Kern, W. (11/2014). "Interfacial adhesion in printed circuit boards", PoyComp Meeting 2014, Leoben, A
Bomze, D., Liska, R. (11/2014). "Cationic frontal polymerization for the production of electrical insulating materials", PolyComp Meeting 2014, Leoben, A
Liksa, R. (11/2014). "Frontal polymerization", PolyComp Meeting 2014, Leoben, A
Plesa, I., Radl, S. V., Schlögl, S., Sumereder, C., Muhr, M., Schichler, U. (11/2014). "Conduction mechanisms in SiC powders", PolyCOmp Meeting 2014, Leoben, A
Anaca, O., Plesa, I., Fasching, R., Sumereder, C., Muhr, M., Schichler, U. (11/2014). "Powder measurement cell: overview and influence of temperature on the electrical properties of SiC powders", Poly Comp Meeting 2014, Leoben, A
Plesa, I., Radl, S. V., Schlögl, S., Sumereder, C., Muhr, M., Schichler, U. (11/2014). "Conduction mechanisms in SiC powders", PolyComp Meeing 2014, Leoben, A
Wiesbrock, F., Wieser, B., Muhr, M., Schichler, U., Pukel, G., Schwarz, R. (11/2014). "Functional adhesives with high temperature and chemical resistance for ultrahigh voltage applications", PolyComp Meeting 2014, Leoben, A
Kochetov. R., Tsekmes, I. A., Smit, J. J. (11/2014). "Electrical properties of polyoxazoline and epoxy-silica nanocomposites / effect of water uptake on dielectric spectrum", PolyComp Meeting 2014, Leoben, A
Moser, A. (11/2014). "Kunststoffe für elektrotechnische Anwendungen", wer was wo 2014
Liska, R. (10/2014). "Advanced applications of photopolymerization: 3D printing of biomaterials", 24. Lecture Conference on Photochemistry
Radl, S. V., Griesser, T., Kreimer, M., Österreicher, A., Kern, W., Schlögl, S. (09/2014). "Smart composite materials bearing photoswitchable corsslinks", 3rd European Symposium of Photopolymer Science
Liska, R. (09/2014). "CD-Labor für Photopolymere in der digitalen und restaurativen Zahnheilkunde", 6. Christian Doppler Forum
Liska, R. (09/2014). "Biokompatible Polymere für den 3D-Druck", Forschungs- und Technologieforum 2014
Kern, W. (09/2014). "Silica nanoparticles bearing a photoreactive shell - interactions with polymer matrices and polymer surfaces", European Symposium on Photopolymer Science, ESPS 2014, Wien, A
Radl, S. V., Griesser, T., Kreimer, M., Österreicher, A., Kern, W., Schlögl, S. (07/2014). "New epoxy-based resins and functional inorganic fillers with tunable mechanical properties for the preparation of composite materials with enhanced", 22nd Annual International Conference on Composites/Nanoengineering (ICCE-22)
Kreimer, M., Lenko, D., Schlögl, S., Bichler, S., Lemesch, G., Ramsauer, F., Ladstätter, W., Kern, W. (07/2014). "Evaluation of selected characterization techniques to determine failure mechanisms of epoxy-based composite materials", 22nd Annual International Conference on Composites/Nanoengineering (ICCE-22)
Schlögl, S., Lenko, D., Bichler, S., Lemesch, G., Ramsauer, F., Ladstätter, W., Kern, W. (07/2014). "Epoxy-based composites with modified elastomeric damping layers: new approaches for the manufacture of high voltage insulations with improved delamination", 22nd Annual International Conference on Composites/Nanoengineering (ICCE-22)
Manhart, J., Hausberger, A., Mühlbacher, I., Schaller, R., Holzner, A., Kern, W., Schlögl, S. (07/2014). "Structured and functional elastomer-based composites with tailored friction properties", International Conference on Composites and Nano Engineering (ICCE-22)
Liska, R. (05/2014). "Photopolymerization: a long known technique in a modern environment", GDCH, Steinhofer-Vorlesung
Nothdurft, P., Feldbacher, S. (03/2014). "Interfacial adhesion in PCBs", Seminar für Diplomanden und Dissertanten, Lehrstuhl für Chemie der Kunststoffe, Montanuniversität Leoben, A
Kern, W. (03/2014). "Silica nanoparticles bearing a photoreactive shell - interactions with polymer matrices and polymer surfaces", 15. Problemseminar Polymerblends und Nanocomposites, Halle, D
2013
Publikationen in Refereed Journals
Lenko, D., Schlögl, S., Bichler, S., Lemesch, G., Ramsauer, F., Ladstätter, W., Rosc, J., Kern, W. (12/2013). "New approaches towards the investigation on defects and failure mechanisms of insulating composites used in high voltage applications", Composites Part B: Engineering, vol. 58, pp. 83-90
Rossegger, E., Schenk, V., Wiesbrock, F. (9/2013). "Design Strategies for Functionalized Poly(2-Oxazoline)s and Derived Materials", polymers, vol. 5, pp. 956-1011
Konferenzbeiträge
Rossegger, E., Ritter, M., Stelzer, F., Wiesbrock, F. (06/2013). "Helical Forming Poly(2-Azanorbornene)s", in Proc. "European Polymer Congress epf 2013", Book of Abstracts, OC2-98
Nothdurft, P., Feldbacher, S., Kern, W. (06/2013). "Modification of copper surfaces with alkylsilanes and alkylphosphonic derivates", European Polymer Congress epf 2013, Book of Abstracts, P7-68
Buchbeiträge
Lenko, D., Schlögl, S., Bichler, S., Ladstätter, W., Ramsauer, F., Kern, W. (11/2013). "Oberflächenfunktionalisierte Elastomere in Epoxidharzverbunden", 22. Leobener Kunststoff-Kolloquium: Oberflächen und Grenzflächen in der Polymertechnologie, Schriftenreihe Kunststofftechnik Leoben: Band 03, ISBN 978-3-9503248-2-2, S. 24 - 34
Rossegger, E., Stelzer, F., Wiesbrock, F. (09/2013). "Structural Properties of Poly(2-Azanorbornene)s", Advances in Polymer Science and Technology 3, ISBN 978-3-99033-195-8, Trauner Verlag, S. 26 - 26
Feldbacher, S., Woods, R., Satzinger, V., Langer, G., Kern, W. (04/2013). "Long term stable flexible polymeric optical waveguides", The Proceedings of the Austrian-Slovenian Polymer Meeting, ISBN 978-961-269-992-5, e-book, S. 202 - 204
Nothdurft, P., Feldbacher, S., Kern, W. (04/2013). "Anchoring of alkylsilanes and alkylphophonic derivates on copper surfaces", The Proceedings of the Austrian-Slovenian Polymer Meeting, ISBN 978-961-269-992-5, e-book, S. 161 - 162
Poster
Nothdurft, P., Feldbacher, S., Kern, W. (11/2013). "Modification of copper surfaces with alcyl silane and alkyl phosphonic derivatives", 22. Leobener Kunststoff-Kolloquium, Leoben, A
Radl, S. V., Roth, M., Hirschmann, B., Grießer, T., Kern, W. (09/2013). "New functional polynorbornenes bearing anthracene groups for reversible crosslinked materisals", Photopolymerization Fundamentals 2013
Hirschmann, B., Griesser, T., Kern, W. (09/2013). "New functional polynorbornenes bearing anthracene groups for reversible crosslinked materials", Photopolymerization Fundamentals 2013
Nothdurft, P., Feldbacher, S., Kern, W. (06/2013). "Modification of copper surfaces with alkylsilanes and alkylphosphoinc derivates", EPF2013, Pisa, I
Feldbacher, S., Woods, R., Satzinger, V., Langer, G., Kern, W. (04/2013). "Long term stable flexible polymeric optical waveguides", ASPM 2013, Bled, SLO
Nothdurft, P., Feldbacher, S., Kern, W. (04/2013). "Anchoring of alkylsilanes and alkylphosphonic derivates on copper surfaces", ASPM 2013, Bled, SLO
Vorträge
Lenko, D., Schlögl, S., Bichler, S., Ladstätter, W., Ramsauer, F., Kern, W. (11/2013). "Oberflächenfunktionalisierte Elastomere in Epoxidharzverbunden", 22. Leobener Kunststoff-Kolloquium, Leoben, A
Schlögl, S., Radl, S. (11/2013). "Halbleitende Beläge auf Basis von Epoxidharzen mit eingelagerten Siliciumcarbid-Mikrokugeln", PolyComp Meeting, Leoben, A
Kern, W., Wanner, A. (11/2013). "Neue Harze für elektrotechnische Anwendungen", PolyComp Meeting, Leoben, A
Wiesbrock, F., Velic, D., Wieser, B. (11/2013) "Funktionelle Haftvermittler mit hoher Temperatur- und Chemikalienbeständigkeit für Hochspannungsanwendungen", PolyComp Meeting, Leoben, A
Nothdurft, P., Feldbacher, S., Kern, W. (11/2013). "Interfacial Adhesion in PCBs", PolyComp Meeting, Leoben, A
Kochetov, R. (11/2013). "nanoPOWER", PolyComp Meeting, Leoben, A
Plesa, I. (11/2013). "Polymer nanocomposites for electrical engineering applications", PolyComp Meeting, Leoben, A
Riess, G., Andraschek, N. (11/2013). "Komponenten mit hoher Wärmeleitfähigkeit für Hochspannungsanwendungen", PolyComp Meeting, Leoben, A
Payer, M. (10/2013). "Energieeffizienz mit Polymercompositen-K-Projekt PolyCOmp", Clean Tech Innovators Club, Graz, A
Nothdurft, P., Feldbacher, S., Kern, W. (10/2013). "Interfacial Adhesion in PCB s", Meeting ATOTECH, Berlin, D
Rossegger, E., Stelzer, F., Wiesbrock, F. (09/2013). "Structural Properties of Poly(2-Azanorbornene)s", APST3 Linz, A
Wanner, A. (06/2013). "Advanced resins for electrical engineering applications - introduction of PolyComp 03", Seminar für Diplomanden und Dissertanten, Lehrstuhl für Chemie der Kunststoffe, Montanuniversität Leoben, A
Rossegger, E., Ritter, M., Stelzer, F., Wiesbrock, F. (06/2013). "Helical Forming Poly(2-Azanorbornene)s", EPF Conference, Pisa, I
